Watches For scuba diving (dive) - water resistant watches
Scuba Diving Watches For Men
Watches may be crafted to become water resistant. These watches are sometimes called diving watches when they are suitable for scuba diving or saturation diving. The International Organization for Standardization issued a standard for water resistant watches which also prohibits the term "waterproof" to be used with watches, which many countries have adopted. Water resistance is achieved by the gaskets which form a watertight seal, used in conjunction with a sealant applied on the case to help keep water out. The material of the case must also be tested in order to pass as water resistant.
The watches are tested in theoretical depths, thus a watch with a 50 meter rating will be water resistant if it is stationary and under 50 meters of still water for a set amount of time. The most commonly used method for testing the water resistance is by depressurizing a small chamber containing the watch. A sensor measures the movement of the case and crystal to gauge how much pressure the watch is losing and how fast.
The watch never touches water in this type of machine. Another type of machine is used for very deep measure tests, where the watch is immersed in a small container filled with water, this chamber is then submitted to the pressure the watch is supposed to withstand. In neither case is there any variation in the pressure, nor is the watch submitted to that pressure for an extended period of time(normally only a couple of minutes). These are the only logical ways to test the water resistance of a watch, since adding variations added by time spent underwater or the movement of the wearers hands would simply make this a very intricate and difficult measurement. Although confusing this is the best way of telling the customer what to expect.
Watches may be crafted to become water resistant. These watches are sometimes called diving watches when they are suitable for scuba diving or saturation diving. The International Organization for Standardization issued a standard for water resistant watches which also prohibits the term "waterproof" to be used with watches, which many countries have adopted. Water resistance is achieved by the gaskets which form a watertight seal, used in conjunction with a sealant applied on the case to help keep water out. The material of the case must also be tested in order to pass as water resistant.The watches are tested in theoretical depths, thus a watch with a 50 meter rating will be water resistant if it is stationary and under 50 meters of still water for a set amount of time. The most commonly used method for testing the water resistance is by depressurizing a small chamber containing the watch. A sensor measures the movement of the case and crystal to gauge how much pressure the watch is losing and how fast.
The watch never touches water in this type of machine. Another type of machine is used for very deep measure tests, where the watch is immersed in a small container filled with water, this chamber is then submitted to the pressure the watch is supposed to withstand. In neither case is there any variation in the pressure, nor is the watch submitted to that pressure for an extended period of time(normally only a couple of minutes). These are the only logical ways to test the water resistance of a watch, since adding variations added by time spent underwater or the movement of the wearers hands would simply make this a very intricate and difficult measurement. Although confusing this is the best way of telling the customer what to expect.